2018 Cadillac_CT6 Front Camera Calibration

Jan 05,2023
Share :

Function Description:


The function of front camera calibration needs to be performed in the following cases

  • Remove and reinstall the front camera module.
  • Replace and program the front camera module.
  • Remove or replace the front windshield.
  • There are error codes that require calibration.



Operation guide:


1. Through ADAS calibration entrance VIN code, Automatically identify the model 2018 Cadillac CT6


Cadillac_CT6 Front Camera Calibration 01


2. After selecting “ADAS Calibration Function”, click “Front Camera Calibration


Cadillac_CT6 Front Camera Calibration 02


3. Select “Frontview Camera Learn


Cadillac_CT6 Front Camera Calibration 03


4. Confirm the scene that needs to be calibrated


Cadillac_CT6 Front Camera Calibration 04


5. Some preparations before calibration


Cadillac_CT6 Front Camera Calibration 05


6. Make sure to turn on the ignition switch(One button to start the vehicle, please press and hold the start button for 5-10 seconds until the ignition switch is turned on), do not start the engine


Cadillac_CT6 Front Camera Calibration 06


7. Confirm that calibration is required


Cadillac_CT6 Front Camera Calibration 07


8. Start the engine, drive on a road with clear lane lines for calibration, and keep the speed above 60 km/h (38 mph). The calibration process takes about 5 minutes, and the calibration progress value is displayed on the interface


Cadillac_CT6 Front Camera Calibration 08


9. When the calibration progress value reaches 100%, you need to continue driving to confirm that the lane keeping light turns green and confirm that the front camera is working normally


Cadillac_CT6 Front Camera Calibration 09


10. The program is complete, save the report


Cadillac_CT6 Front Camera Calibration 10





Return

Leaving a message
< 1 >

Related information

Where to buy Become our distributor