FIAT 500X 2015 Front Camera (HALF) Calibration

Function Description:

The front camera calibration function needs to be performed in the following cases

• Front camera/ECU (HALF) replaced
• The front windshield has been replaced
• Structural Changes/Chassis Adjustments
• Level sensor replaced
• There are related fault codes

Operation guide:

1. Automatically identify the model 500X through the ADAS calibration entrance VIN (If it is not recognized, the corresponding menu will be displayed, select manually and enter)

2. After selecting ADAS Calibration Function, click Front Camera Calibration

3. Select Service Single Pole Calibration

4. Situations where the current function needs to be performed

5. Preparations required to perform the current function

6. Follow the prompts, after the operation is complete, click Next Step

7. Follow the prompts, after the operation is complete, click Next Step

8. Follow the prompts, after the operation is complete, click Next Step

9. Follow the prompts, after the operation is complete, click Next Step

10. Follow the prompts, after the operation is complete, click Next Step

11. Follow the prompts, after the operation is complete, click Next Step

12. Follow the prompts, after the operation is complete, click Next Step

13. Follow the prompts, after the operation is complete, click Next Step

14. Follow the prompts, after the operation is complete, click Next Step

15. Follow the prompts, after the operation is complete, click Next Step

16. Follow the prompts, after the operation is complete, click Next Step

17. Follow the prompts, after the operation is complete, click Next Step

18. Follow the prompts, after the operation is complete, click Next Step

19. Follow the prompts, after the operation is completed, click the calibration button to perform the calibration function

20. Calibration complete

21. Turn off the ignition, wait for the progress bar (or countdown) to end, and then turn on the ignition

22. Print the report information after calibration