SmartSafe CNC-603A cleaning injectors with ultrasonic, and can clean multiple fuel injectors at the same time. Combined with ultrasonic technology and microprocessor hydraulic control cleaning detection technology, CNC-603A is an ideal tool for injector cleaning and testing.
contact
About the practical introduction of CNC-603A ultrasonic fuel injector cleaner, SmartSafe has prepared a wonderful video explanation for you. For more practical content, click on the video training center!
About the full-function introduction of CNC-603A ultrasonic fuel injector cleaner, SmartSafe provides you with a comprehensive solution, and it will be a good helper in your shop!
|
Item |
Description |
√ |
|
Uniformity/Sprayability test |
To detect the uniformity of the fuel injection quantity of each injector and monitor the spraying status of injectors thoroughly and carefully by using the backlight, and to backflush injectors |
√ |
|
Leakage test |
To test the leakage and dribbling conditions of injectors under system pressure |
√ |
|
Auto. test |
Under specific working conditions and parameters, the precise simulation of test of injectors under various working conditions |
√ |
|
Ultrasonic cleaning |
To perform ultrasonic cleaning on multiple injectors at the same time, removing carbon deposits on injectors completely |
√ |
|
On-Vehicle Cleaning |
Coming with a variety of disassembly-free cleaning connectors, the device can be used to perform on-vehicle cleaning and maintenance for various vehicle models |
√ |
|
Language selection |
The system supports multiple languages and users can choose the appropriate language according to their needs |
√ |
|
Version information |
To check the software version information of the current device |
√ |
|
Power supply
|
AC220V±10% 50Hz/60Hz1.5A max
|
|
Main engine power
|
300W
|
|
Ultrasonic cleaning power
|
100W
|
|
Rotational speed range
|
10~9990rpm(steplength:10rpm)
|
|
Timing range
|
1-9999s
|
|
Pulse width range
|
0.5~25ms(step length:0.1ms)
|
|
Environment temperature
|
0~45℃
|
|
Relative humidity
|
85%
|
|
External magnetic field intensity
|
＜400A/m
|
|
Operation volume
|
3L
|
The transparent tubes are made of glass. So, do not place other items around the device to avoid scratching and fragmenting the tubes.
Disassembly of the tubes should be performed after the system pressure is displayed as zero.
It must be ensured that the power supply provided is grounded well.
Take good care of the machine. If the protective film on the control panel is stained with the cleaning agent, please wipe it off in time. Also, keep the pulse signal lines away from the cleaning agent and test the solution.
Learn more
Learn more
Learn more
Learn more
